Home Security System Projects Ideas and Downloads

Table of Content

• Design & Implementation of Smart House Control Using LabVIEW (Electronics Project)
• Design and Implementation of a Wi-Fi Based Home Automation System (Computer/Electronics Project)
• Project Tips
• Ijraset Journal For Research in Applied Science and Engineering Technology
• Wireless Home Security System Seminar Abstract, Report
• Top .Net Projects

The system with the use of face recognition increased the security and gave more information about the home and the surroundins. Only one name in the list means he is the first person enters the room and for that reason light/lock door must turn on. The RF receiver of the lock door receives the sent signal and then lock/unlock the door. For the face detection system feature, one needs to firstly run an external python program to allow the camera to capture and detect face since Arduino IDE does not support the python programming language. Sender module Its a small PCB sub-assembly capable of transmitting a radio wave and modulating that wave to carry data. Transmitter modules are usually implemented alongside a micro controller which will provide data to the module which can be transmitted.

Everyone enters or leaves the room must use the camera to capture a picture of himself so system can know how many people in the room now. Picture is not for a human, if the picture has a face, then the program continues. After a user push the button, the camera will capture a picture of the user.

Design & Implementation of Smart House Control Using LabVIEW (Electronics Project)

An example of sensor that used in security system is an active sensor. Active sensors in motion detectors system are commonly used inside homes for a security system. An active motion detector emits optics or sound waves and measures feedback to detect motion. The simplest type of active motion detector is commonly used in commercial doorways to trigger a doorbell.

Infrared motion detectors placed in house security system in crucial areas of the house can detect any burglars and alert the home owner or police. The first security system invented, house alarms were triggered by the release of a pressure button fitted into a door or window frame. This basic alarm was fundamentally flawed as the entire intruder needed to do to silence the alarm was to close the door or window.

Design and Implementation of a Wi-Fi Based Home Automation System (Computer/Electronics Project)

The relevant information is gathered through literature review from previous chapter. Data on motion detection and security system projects has been collected where the theoretical design is studied based on the motion detector for security concept. The understanding on the electrical structure for the hardware development is needed for the design circuit process of the motion detector and the basic security circuit. The next is the hardware development according to the circuit designed. A person who enters the area will interrupts the beam causing an alarm to be triggered.

The developed approach is benefited regarding preventing the waste of energy when it is not hot enough to use a fan and assist the disabled to switch on or off fan automatically. Then, they described the controlling processes and monitoring of the smart homes and also emphasized on the advantages and disadvantages of various wireless technologies such as, GSM, Bluetooth, ZigBee, and Wi-Fi. Furthermore, they provided an overview of different smart home designs. The authors in and focused on the enabling technologies, security challenges, and the applications in the smart homes.

Project Tips

This project is designed as a smart plant monitoring system based on IoT through this one can easily monitor the light intensity, humidity and temperature like quantities of a plant from anywhere in the world. The data visualization can be achieved by using a android/ios application. In this paper, we introduced an IOT based home security system which is not only safe to use but also cost effective.Home security system is a solution to problems like theft, instruction, fire, energy conservation etc. The Raspberry Pi is a great platform for building highly capable, embedded systems. This makes it possible for users to rest assured that their belongings are secure. Now a day’s people are not aware about the importance of energy conservation.

The concepts of motion detector are the major element as a guide for the development of the security system. Chapter 2 explains the systems involved for the development of the active infrared motion detector for house security system. This project is focusing on developing a house security system with an active infrared motion detector which is controlled by microcontroller Intel 8051. The first part is concern on the hardware development where all electronics component are connected via the circuit design using wrapping technique. An active infrared, the magnetic sensor, and keypad are the input components while buzzer, indicator, and LCD display are the output components where it’s all controlled by controller circuit.

Ijraset Journal For Research in Applied Science and Engineering Technology

In-today's world the rapid and frequent development of economy and production activities has led to reduce the quality of air. Many studies have shown that reducing air quality not only brings serious damage, but also causes negative side effects in human health. Till now Wireless Sensor Networks have been used to monitor the presence of gas in the surroundings. Since, it requires a very large area for network coverage and also, thousands of sensor nodes have to be placed in a network.

For that reason, an effective house security system at low cost is built where user can also program the security system by their own. This is a digital home security system with voice feature which can monitor room temperature, smoke, motion, and windows & doors. This section concisely presents the most relevant literature publications on the topic. The authors in provided an Overview of the security in the smart homes and their main components.

The world is changing, and almost everything around us is linked to the internet. Homes and cities are converting into smart cities and smart homes. Smart homes have increased since those years and by 2012 more than 1.5 million home automation system were installed, and it kept increasing until it reached 45 million by 2018.

There are various versions of 8051 with different speeds and amount of the on-chip ROM which is valuable on controlling a system designed. 4 Software development The software structure is using the assembly language where a set of program based on security system is assembled using ASM51 assembler. Sensors are connected to a control unit via either a low-voltage hardwire which in turn connects to a means for announcing the alarm to elicit response. In a new construction systems are predominately hardwired for economy while in retrofits wireless systems may be more economical and certainly quicker to install. Some systems are dedicated to one mission; handle fire, intrusion, and safety alarms simultaneously.

Most of sensor device is connected with IoT is more popular in recent times. In this paper a model based in IoT is proposed with aim to prevent accidents due to drink-driving and drowsiness of driver. Internet of things is one the innovative and smart technology of this era.

During the first pass, the Cross Assembler builds a symbol table and labels that used in the source file. While the second pass of the Cross Assembler is actually translates the source file into the machine language object file. During the second pass, the listing file of the assembled is generated for the analysis purpose. The Special Function Register space contains all the on-chip peripheral input and output registers as well as particular registers that need program access. The maximum number of Special Function Registers is 128, though the actual number on an 8051 family member depends on the number and type of peripheral functions integrated on.

Objects that generate heat also generate infrared radiation and those objects include animals and the human body whose radiation is strongest at a wavelength of 9. Infrared in this range will not pass through many types of material that pass visible light such as ordinary window glass and plastic. However it can pass through, with some attenuation, material that is opaque to visible light such as germanium and silicon. The active infrared sensors use invisible light to scan a defined area.